Shield Mini HD

Energy efficiency, privacy and vandalism protection at a mid-range price point — the right tool for ground-floor windows, storefronts and counter enclosures where moderate security is required.

Why It Fits

More than basic solar. Less than maximum-security fortification.

A ground-floor retail window needs vandalism resistance. A residential patio door needs privacy and noise reduction. A storefront needs weather protection — without looking like a prison.

Shield Mini HD is Talius’ medium-duty, energy-efficient roll shutter profile, engineered for applications where solar control, privacy and vandalism protection are the primary concerns — without the weight or cost of a heavy-duty security profile.

"Right-size every quote. Avoid over-specifying — and avoid under-specifying."
— B2B Sales Note

Anatomy

Five components. Engineered for medium-duty performance.

01

Panel Box

Two-part, 5-corner housing that stores the rolled curtain and shaft.

02

Curtain Profile

Interlocking aluminum slats with a hard polyurethane foam core.

03

Guide Rails

PRO or SAFE rails fitted with weather stripping.

04

Bottom Profile

Extruded aluminum bar that seals the curtain when fully closed.

05

Operator

Manual crank or motorized — Standard limit or Somfy RTS.

Technical Specifications

The numbers dealers need to specify with confidence.

Specification Detail
Cover Height 1.56" (40 mm)
Slat Thickness 0.38" (9 mm)
Wall Thickness 0.0130" (0.33 mm)
Slats per Height 0.64 / inch (25 / m)
Weight per Area 0.0071 lbs/in² (5.0 kg/m²)
Finish Enamel 0.0012" (0.03 mm) / PU-polyamide top coat
Core Material Polyurethane hard foam
Max Width (A2) 14 ft (4.27 m)
Max Height (B1) 10 ft (3.05 m)
Max Area 100 ft² (9.30 m²)

Critical note for dealers

You must comply with all three maximums (width, height, area). Do not exceed any one of them. Maximums are automatically reduced for high-wind exposure, stringent security requirements, or freestanding applications such as patio enclosures.

B2B Applications

Where Shield Mini HD excels.

Residential
Windows & Entryways

Privacy, temperature control, noise reduction and vandalism protection — without the bunker feel. Foam core blocks summer heat, traps winter warmth, and delivers near-total blackout.

Right choice for most ground-floor openings.

Commercial
Counters & Cabinets

Commercial kitchens, retail counters, pharmacy pickup windows and service kiosks. Clean 1.56″ slat aesthetic, hard foam resists casual impact, disappears into a compact box by day.

Vandalism resistance without heavy-duty cost.

Outdoor
High-Exposure Retail

Ground-floor offices, restaurants and retail face scratching, kicking and thrown objects more than planned break-ins. Shield Mini HD provides impact resistance, privacy and solar control.

Upgrade to SAFE Mini for high-risk locations.

Key Differentiator

Vandalism protection that sets it apart from HQ Macro.

Built to resist scratching with keys, kicks, thrown bottles or rocks, and attempts to pry the bottom profile — the everyday risks faced by storefronts in urban areas.

Hard foam core

More impact-resistant than standard PU foam. Resists denting from kicks, thrown objects, and casual impact.

PU-polyamide top coat

Very durable finish that resists scratching and chemical exposure.

Improved dent resistance

0.0130″ wall thickness and 1.56″ slat design distribute impact forces more effectively than thinner profiles.

R

Significantly improves window R-value

The polyurethane foam core has low thermal conductivity. When the curtain is closed, it creates an insulating air pocket between the shutter and the glass — blocking solar heat gain in summer and trapping indoor heat in winter.

Sales note: Lead with energy savings, not just protection. A business owner may not think they need a roll shutter — but they will listen when lower cooling costs are on the table. Vandalism protection and privacy become additional selling points.

Configure Your Spec

Colours, rails, operators, locks.

White
Beige
Brown
Black
silver

Plus 1,800+ custom colours from the Benjamin Moore fan deck — applied to curtain, rails, bottom profile, sills, build-up and panel box. Custom price decreases per unit at higher quantity. No upcharge on aluminum build-up tubing.

manual

• Gear with crank rod (68″)
• Tape operators (AA only)
• Torsion springs (≥27″ A2)

Motorized

• Standard limit motors
• Somfy RTS (programmable)
• Manual override option

Add the Motor Preparation Package with manual units to make future motorization simple — only the motor and switch need to be added later.

PRO

Build-up 0.25″ (6.5 mm)
Widths < 6′ exterior, < 10′ interior

SAFE

Build-up 0.25″ (6.5 mm)
Same range, alternative profile

PRO-40

Build-up 0.25″ (6.5 mm)
Increased wind load • larger spans

SAFE-40

Build-up 0.25″ (6.5 mm)
Higher security + wind load

Recommendation: upgrade to PRO-40 or SAFE-40 for any unit wider than 8′ or used in windy / high-security conditions.

LOCK TYPE SECURITY BEST FOR MOTOR
Manual Sliding Lock Bars Low Counter enclosures, security not a priority NO
Centre Key Lock (Both Sides) Medium Counter enclosures, torsion spring units NO
Octopod Centre Key (One Side) High High-security counter enclosures NO
Talius Hanger Locks High Windows, doors, motorized units YES

Critical :

never specify sliding bar locks on motorized units. Failure to disengage manual locks will severely damage the curtain. Always specify Talius Hanger Locks for motorization.

Installation Requirements

Four rules that prevent callbacks.

01

Use the correct dimension

Talius price grids use A2 (width including guide rails). If you measured A1, add the rail width before looking up the base price

02

Account for headroom

Panel box height varies with shaft size. The bottom profile protrudes ~2″ (50 mm) below the box when fully rolled up.

03

Add 2" upset to B1

Your B1 (guide rail height) must include 2″ of upset so the bottom profile clears the top of the opening.

04

Specify Winterization in cold climates

Aluminum slats swell slightly in cold, changing rolled curtain diameter. The package adds box reinforcement and surface stoppers.

FAQ

Frequently Asked Questions

Common Shield Mini HD questions from dealers, specifiers, and installers.

Shield Mini HD is a medium-duty profile with a hard polyurethane foam core. It offers more dent resistance and vandalism protection than HQ Macro (light-duty) but is less expensive and lighter than SAFE Mini (heavy-duty with hard resin core). Choose Shield Mini HD for ground-floor applications with moderate security risk.
Maximum width is 14 ft (4.27 m), maximum height is 10 ft (3.05 m), and maximum area is 100 ft² (9.30 m²). For larger openings, consider AG-77.
Yes, with PRO-40 or SAFE-40 guide rails. Maximums are automatically reduced if the unit is exposed to high winds or is freestanding (no wall behind). For coastal or hurricane-prone areas, SAFE Mini with SafeGuard is recommended.
Yes. Standard limit motors and Somfy RTS motors are both available. If quoting a motorized unit, always specify Talius Hanger Locks (automatic) rather than manual sliding bars.
Lead times vary based on current production volume and the complexity of the custom match. Contact the Talius Channel Sales team for current estimates.
Add to your portfolio

Ready to spec Shield Mini HD on your next project?

Compare Other Profiles

Light

HQ Macro HD

Heavy

Safe Mini

Large Opening

AG-77

See-Through

Safe View

Garage / XL

Mammoth